OMNIFUZZ Silicon Fuzz
Available in the EU exclusivly at palf.fr
OMNIFUZZ is a silicon transistor fuzz and treble booster using BC108B that you can use anywhere in your signal chain thanks to the pickup impedance simulator. The BASS setting lets you have 2 pedals in 1- a huge fuzz and a treble booster! The input capacitance of the pedal can be set from a classic fuzz face all the way down to a rangemaster. INPUT is the gain setting of the fuzz and BIAS sets the feel and texture. The pickup simulator lets you place a somewhat finicky effect wherever you want in you chain, even after a buffer.
Current draw: 3mA at 9V, 6mA at 18V
Power: This pedal can be powered by a 5-18V DC power source (2.1mm center negative).
Size, weight: (LxWxH) 12.6 x 6.6 x 5.7cm, 300g
Input impedance: 500kΩ with PICKUP switch up
Operation: Vol: Raise or lower the output volume. Pickup switch: Turns on a pickup impedance simulator to use the fuzz anywhere in your signal chain. Input: Lowers the volume of the input signal and sets the gain of the fuzz. Bias: Sets the texture and feel of fuzz. Bass: Cuts bass towards the left. Full counterclockwise will sound like a treble booster. Internal Fuzz trim pot: sets the amount of fuzz. Generally this trimmer is left all the up.
Classic fuzz face setting: BIAS around 2:00, BASS all the way up, INPUT from 3:00 and up and VOL to taste.
Rangemaster setting: BASS minimum, BIAS and VOLUME all the up, INPUT to taste for more or less saturation.
And of course in between these two settings you can have a ton of different possibilities.
Inside the pedal is a trim pot that sets the fuzz level like on a fuzz face. The INPUT setting on the pedal sets the gain much better than a fuzz face- it works like your guitar’s volume pot and sets the gain for great clean up or full on fuzz.